Initialize devices
Create RAID device
Create partitions on RAID device

Welcome to fdisk <removed>.
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Device does not contain a recognized partition table.
Created a new <removed>.

Command (m for help): Partition type
   p   primary (0 primary, 0 extended, 4 free)
   e   extended (container for logical partitions)
Select (default p): Partition number (1-4, default 1): First sector (2048-102271, default 2048): Last sector, +sectors or +size{K,M,G,T,P} (2048-102271, default 102271): 
Created a new <removed>.

Command (m for help): Partition type
   p   primary (1 primary, 0 extended, 3 free)
   e   extended (container for logical partitions)
Select (default p): Partition number (2-4, default 2): First sector (22528-102271, default 22528): Last sector, +sectors or +size{K,M,G,T,P} (22528-102271, default 102271): 
Created a new <removed>.

Command (m for help): Disk /dev/md8: 50 MiB, 52363264 bytes, 102272 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / <removed> bytes
Disklabel type: dos
Disk identifier: <removed>

Device     Boot Start   End Sectors Size Id Type
/dev/md8p1       2048 22527   20480  10M 83 Linux
/dev/md8p2      22528 43007   20480  10M 83 Linux

Command (m for help): The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.

Probe first RAID member
ID_FS_TYPE=linux_raid_member
ID_FS_USAGE=raid


ID_FS_VERSION=0.90.0
Probe second RAID member
ID_FS_TYPE=linux_raid_member
ID_FS_USAGE=raid


ID_FS_VERSION=0.90.0
Stop RAID device
Deinitialize devices
